Used Trumpf Trumatic L2530 cnc laser for sale:
Technical Data
Year 1998
Laser Power 3000w / 3kw
NEW LASER RESONATOR IN 2004 fully replaced by Trumpf / 19,000 hours at the time of replacing the resonator now 35,000 hours.
Working Range 2500mm x 1500mm
Control Siemens Sinumerik 840D
The machine has been working on single shifts.
• When Optics were changed? Very few changed in the last few years but cleaned & inspected and changed as necessary during routine servicing
• New rails/bearings on the x y z? Z axis only were changed a few years ago
• When Bellows were changed? As required at routine service – All in good condition
• Chiller has had fans replaced and an upgrade from R22 to a drop in alternative refrigerant.
An ideal laser to bring your company into in house laser cutting.
Standard Equipment
Automatic pallet changer
Quick change Laser cutting head with 5” lens
Quick change Laser cutting head with 7.5” lens
Auto sheet position sensing system
Programmable cutting gas selection and pressure
Conveyor for small parts/scrap
Work area lighting
Positioning laser diode
Oil spray device
Autolas plus
Hi-Las
PMS Plasma sensor
Automatic shutdown function
TFT colour screen
RJ45 network connection
USB drive
Multi chamber exhaust system
Dust extractor
Chiller
Light barrier safety system
Fully serviced.
Purchased from an aerospace company.
Compact / small foot print laser that takes up minimal space on your factory floor.
Cutting capacity:
| MAX. SHEET THICKNESS, MILD STEEL | 20 mm | 20 mm |
| MAX. SHEET THICKNESS, STAINLESS STEEL | 12.7 mm | 12.7 mm |
| MAX. SHEET THICKNESS, ALUMINIUM | 8 mm | 8 mm |
Fiber/fibre laser also available.
3000 Watt TRUMPF 2530 LASER Cutting System
Condition: Good working condition
3000 Watt
48” x 96”
Beam on hours coming soon
Machine on hours coming soon
Designed for ergonomic work processes, the L2530 is fed “longways on.” The machine front may be opened by sliding doors or over its entire width to facilitate loading and unloading parallel to production and the pallet changer is accessible from three sides. This not only provides greater accessibility to parts, but is among the many design features of the machine. In addition, the machine body consists of a single welded construction; it is designed with a minimal space requirement; it is simple to operate; and has newly integrated features that meet high safety and environmental standards. Despite its small footprint, the L2530 accommodates a full 4 x 8-foot working range.
Sheet Capacity 4′ x 8′
Travels Y Axis 100″
X Axis 50″
Z Axis 4.5″
Number of tables
2 Auto Pallet Shuttle
Rapid Traverse Rate
3346 IPM
Equipped With:
Flying Optics
Seimens CNC
Resonator TLF 3000T
Light Curtains
An ideal laser to bring your company into in house laser cutting.
If you have any enquiries, get in touch below
