Max. tube length | 3000.0 mm |
---|---|
Max. tube Ø | 45.0 mm |
Bending angle | 180 ° |
Bending speed | |
Total power | |
——————- | |
Length x width x height | – × – × – |
Weight | 8000.0 kg |
Worked hours | |
Hours under power | |
State | good |
At local norms | ——— |
Status |
multi-axis tube bending machine
Right and left hand bending with variable radius
Bending capacity (R+45 kg/mm 2square): 42 mm x 2.5 mm thickness (max + 45 not through)
Unloadable tube length: (straight tubes): 118.11”/3000 mm
Diameter of unloadable bars or tubes:
– outer diameter: 45 mm / 1.77”
– inner diameter: 20 mm / 0.78”
Clamp torque (for tube overhang with respect to clamp):
– with inner clamp up to 0 25 mm: 0.2901 PSI or 20 Nm
– with inner clamp up to 0 30 mm: 0.003481 PSI or 24 Nm
– with inner clamp larger than 0 30 mm: 01 PSI or 51 Nm
– with inner clamp: 0.01 PSI or 51 Nm
Working stroke travel:
– X-axis: 118.11”/3000 mm
– R-axis: 3.93”/100 mm
X-axis speed: 59.05”/sec. or 1500 mm/s
R-axis speed: 120 degrees / second
Z-axis speed: 180 degrees / second
Hydraulic pressure: max. 130 bar
X-axis tolerance: +/- 0.15 mm
R-axis tolerance: +/- 0.1 degrees
Z-axis tolerance: +/- 0.1 degrees
Tube sizes:
– Round: max 1.75” with max of 0.098” wall thickness, min 0.25” with a max wall thickness being solid
– Square: max 1.375” with a max of 0.060” wall thickness, min 0.25” with max wall thickness being solid
– Rectangle or odd shapes: any that will fit in a 1.75” circle, max wall thickness will depend on shape.
Tube length:
– Max tube length: 252” / Min tube length depends on tube
– Max length on tubes over 1.625” will have to be determined.
Radius size:
– Max radius size: 4.72” Inside Radius (ISR) Min radius size: 1.29” Inside Radius (ISR)
– Round variable radius benderin: needs to be at least 10 times the tube diameter
Hydraulic System:
– Tank capacity: 79.252 Gal./300 L
– Pressure: 120 Bar
Machine Weight: 17,600 lbs. / 8,000 kgs.
Features:
Control: BLM PC-Vision control with color monitor.
Windows 2000 Professional operating system PC-Based VGP3D simulation software Operators model: manual and automatic pedalistal control – 2-hands with E-Stop, Cycle stop, 2-hand control hydraulics system, hydraulic mandrel, misc. tooling
Voltage: 480/3/60
Large capacity 15metre CNC tube bender also available for sale.
If you have any enquiries, get in touch below