Amada FO 3015 NT
SPECIFICATIONS
Ambient temperature
5 to 35°C {41 to 95 F}
Max. relative humidity
75 % without dew condensation
Illumination
Over 500 lux.
Model
FO3015
4kw
Axis travel
X
3420 mm
{134.64 in.}
Y
1550 mm
{61.02 in.}
Z
200 mm
{7.87 in.}
Cutting area
X
3070 mm
{120.87 in.}
Y
1550 mm
{61.02 in.}
Z
200 mm
{7.87 in.}
Cutting feed rate
X
0 to 20 m/min {0 to 65.60 ft/min}
Y
0 to 20 m/min {0 to 65.60 ft/min}
Model
AMNC-F (FANUC 160i-LB)
Controlled axes
X, Y, Z (3 axes simultaneously controlled)
Input method
3.5″ floppy disk, manual data input or CD-ROM
Minimum dimensional unit
0.001 mm {0.0001 in.}
Memory capacity
Equivalent 1280 or 5120 m {4198.4 or 16793.6 ft} (optional)
I/O interface
RS232C
Model
FANUC AF-2000E
FANUC AF-4000E
Rated output
2000 W
4000 W
Stability
±1.0 %
±2.0 %
Max. output
2000 W (CW), 3300 W (Pulse peak)
4000 W (CW), 5000 W (Pulse peak)
Frequency range
5 to 2000 Hz
5 to 2000 Hz
Duty range
0 to 100 %
0 to 100 %
Laser beam
CO2 laser beam
CO2 laser beam
Laser beam wavelength
10.6 µm
10.6 µm
Laser beam mode
Low-order mode
Low-order mode
Laser beam diameter
Approx. 27 mm {1.06 in.} at source
Approx. 27 mm {1.06 in.} at source
Laser beam dispersion angle
Below 2 mrad
Below 2 mrad
Laser gas mixture ratio
5±0.25 % CO2
40±2.00 % He
55±2.75 % N2
5±0.25 % CO2
40±2.00 % He
55±2.75 % N2
Laser gas supply
0.17 MPa {1.7 kgf/cm² or 24.18 psi},
10 liters/h
0.17 MPa {1.7 kgf/cm² or 24.18 psi},
10 liters/h
Cooling water supply
0.35±0.1 MPa {3.5±1 kgf/cm² or
49.8±14 psi}, over 75 liters/min
0.35±0.1 MPa {3.5±1 kgf/cm² or
49.8±14 psi}, over 160 liters/min
Power supply
200 V (±10 %), AC, 50/60 Hz (±1 Hz),
33 kVA, 3-phase
200 V (±10 %), AC, 50/60 Hz (±1 Hz),
55 kVA, 3-phase
Dimensions (W x D x H)
2050 x 750 x 1056 mm {80.71 x 29.53 x 41.57 in.}
2050 x 750 x 1176 mm {80.71 x 29.53 x 46.30 in.}
If you have any enquiries, get in touch below
